Product Description

This is the motor you want if you are looking for a low cost unipolar stepper that needs to do some work.

Motor Controller and Connection
The 3314 stepper motor connects to:

• 1062 - PhidgetStepper Unipolar 4-Motor
• 1063 - PhidgetStepper Bipolar 1-Motor

The following table shows how to connect the motor wires to the 1062 board connectors to get clockwise rotation. To wire for counter-clockwise rotation, swap the Black and Blue wires.

Wire Color	Red	Yellow	Orange	Black	Blue	Red
Board Connector	+	A	B	C	D	+

 

 

To connect the motor to the 1063, leave out the two Red wires.
Note: Make sure to unplug the power cord from the controller board before switching wires around.

Resources

Product Specifications

Characteristic	Value
Step Angle	7.5¢X
Step Accuracy	7%
Holding Torque	950 g-cm / 13.19 oz-in
Voltage	12V
Rated Current	0.28A
Shaft Diameter	3mm
Weight	138g
Number of Leads	6