Product Description

This motor is good for turning small knobs, buttons, etc.

Motor Controller and Connection
The 3316 stepper motor connects to:

• 1062 - PhidgetStepper Unipolar 4-Motor
• 1063 - PhidgetStepper Bipolar 1-Motor

The following table shows how to connect the motor wires to the 1062 board connectors to get clockwise rotation. To wire for counter-clockwise rotation, swap the Black and White wires.

Wire Color	Orange	Red	Yellow	Black	White	Brown
Board Connector	+	A	B	C	D	+

 

 

To connect the motor to the 1063, leave out the Orange and Brown wires.
Note: Make sure to unplug the power cord from the controller board before switching wires around.

Resources

Product Specifications

Characteristic	Value
Step Angle	18¢X
Step Accuracy	7%
Holding Torque	50 g-cm / 0.69 oz-in
Voltage	12V
Rated Current	0.08A
Shaft Diameter	1.5mm
Weight	24g
Number of Leads	6