TchineseEnglish
Your cart contains 0 items
Top » Catalog » Sensors » Proximity » 3527_0 » Autonics PR30-15DN Inductive Proximity Sensor - 15mm [3527_0]
US$41.30

This inductive sensor can detect metallic objects within 15mm and behaves like a switch that connects to a digital input.

Autonics PR30-15DN Inductive Proximity Sensor - 15mm






This inductive sensor can detect metallic objects within 15mm and behaves like a switch that connects to a digital input.






Proximity sensors are the most common and affordable solution for no-touch object detection. The most commonly-used proximity sensor is the inductive type, which generates an electromagnetic field to sense metal objects passing close to its face. This is usually the easiest sensing technology to apply in applications where the metal object to be detected is within an inch or two of the sensor face.

Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness and type of metal being detected and will in general be between 70 to 80% of the standard distance.

Recommended Power Supplies:

  • 3085 ¡V Power Supply 12VDC 0.5A - US

  • Comes packaged with :
    Mounting Hardware Kit

    Mounting Kit


    Related Products :
    Have a look at our other inductive proximity sensors:

  • 3526_0 - Autonics Inductive Proximity Sensor 4mm
  • 3528_0 - SN04-N Inductive Proximity Sensor 5mm


  • Sensor Properties

    Detecting Distance Max 15 mm
    Setting Distance Max 10.5 mm
    Sensor Type Proximity (Inductive)
    Sensor Output Switch Type Normally Open
    Detection Hysteresis Max 10 %
    Sensor Response Time Max 5 ms


    Electrical Properties

    Supply Voltage Min 12 V DC
    Supply Voltage Max 24 V DC
    Current Consumption Max 10 mA
    Protection Circuitry Reverse Polarity, Surge, Overload and Short-Circuit


    Physical Properties

    Cable Length 2 m
    Material ABS Resin / Metal
    Operating Indicator Red LED
    IP Rating IP67
    Operating Temperature Min -25 °C
    Operating Temperature Max 70°C
    Operating Humidity Min 35 %RH
    Operating Humidity Max 95 %RH


    This sensor connects to any device with a Digital Input.

    This is how you connect the 3527 to a Phidget board that does not have 12V power such as the 1018, 1012 and 1203 using our 12VDC Power Supply:

  • Connect the +12 wire from the Power Supply (that's the one with the white line) to the 3527 Brown wire.
  • Connect the 3527 Black wire to a Digital Input on the 1018.
  • Connect the Power supply Ground Wire and the 3527 Blue wire to the Digital Input Ground connector on the 1018.

  • Connection


    Note: When the 3527 is connected to a 1012, it will behave as a Normally Close (NC) sensor instead of Normally Open (NO).

    The 3527 can also be used with the 1144 - 12V Sensor Adapter if you want to connect to a device with an analog input without worrying about providing a 12V power supply.

    For boards that have power input, if the supplied power is within 12-24VDC, the +V line can be connected to the terminal block, powering the sensor from the Phidget. The 1019, 1073, and 1063 all accept external power.


    Connection




    This product was added to our catalog on Sunday 05 October, 2014.
    Reviews