TchineseEnglish
Your cart contains 2 items
Top » Catalog » Sensors » 3523_0 » Lanbao CR18SCN08DNO Capacitive Proximity Sensor - 8mm [3523_0]
US$41.30

This capacitive sensor can detect metals and some other materials within 8mm and behaves like a switch that connects to a digital input.

Lanbao CR18SCN08DNO Capacitive Proximity Sensor - 8mm






This capacitive sensor can detect metals and some other materials within 8mm and behaves like a switch that connects to a digital input.






This capacitive proximity sensor is used for non-contact detection of metallic and non-metallic objects such as liquid, powder and granular materials; it can also detect materials through glass or plastic walls.
Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness and type of material being detected.
You can adjust the operating distance by turning a screw placed on the side of the sensor.


Comes Packaged with:

Accessories

  • 2 plastic rings
  • a screwdriver


  • Sensor Properties

    Detecting Distance Max 8 mm
    Setting Distance Max 6.4 mm
    Sensor Type Proximity (Capacitive)
    Sensor Output Switch Type Normally Open
    Detection Hysteresis Min 3 %
    Detection Hysteresis Max 20 %
    Sensor Response Time Max 20 ms


    Electrical Properties

    Supply Voltage Min 10 V DC
    Supply Voltage Max 30 V DC
    Current Consumption Max 15 mA
    Protection Circuitry Reverse Polarity, Surge, Overload and Short-Circuit


    Physical Properties

    Cable Length 2 m
    Material PBT
    Operating Indicator Yellow LED
    IP Rating IP67
    Length 78 mm
    Diameter 18 mm
    Operating Temperature Min -25 °C
    Operating Temperature Max 70 °C
    Operating Humidity Min 35 %RH
    Operating Humidity Max 95 %RH


    This sensor connects to any device with a Digital Input. This is how you connect the 3523 to a Phidget board that does not have 12V power such as the 1018, 1012, 1202, and 1203 using our 12VDC Power Supply:

  • Connect the +12 wire from the Power Supply (that's the one with the white line) to the 3523 Brown wire.
  • Connect the 3523 Black wire to a Digital Input on the 1018.
  • Connect the Power supply Ground Wire and the 3523 Blue wire to the Digital Input Ground connector on the 1018.
  • Connection

    Note: When the 3523 is connected to a 1012, it will behave as a Normally Close (NC) sensor instead of Normally Open (NO).
    For boards that have power input, if the supplied power is within 12-24VDC, the +V line can be connected to the terminal block, powering the sensor from the Phidget. The 1019, 1073, and 1067 all accept external power.







    Connection




    This product was added to our catalog on Sunday 05 October, 2014.
    Reviews