TchineseEnglish
Your cart contains 0 items
Top » Catalog » Controllers » Motors » 3540_0 » RC Linear Actuator L12-100-100-06-R [3540_0]
US$82.60

This servo actuator has a stroke length of 100mm with a peak force of 23N and a peak speed of 12 mm/s.

RC Linear Actuator L12-100-100-06-R





This servo actuator has a stroke length of 100mm with a peak force of 23N and a peak speed of 12 mm/s.







The L12 Linear Actuator is an axial design with a powerful drivetrain and a rectangular cross section for increased rigidity.
The L12 actuator is designed to move push or pull loads along its full stroke length. The speed of travel is determined by the gearing of the actuator and the load or force the actuator is working against at a given point in time. When power is removed, the actuator stops moving and holds its position, unless the applied load exceeds the backdrive force, in which case the actuator will backdrive. Stalling the actuator under power for short periods of time (several seconds) will not damage the actuator.
The linear actuator is an alternative to designing with gears, motors, servos and linkages. The controller sees the actuator as a standard RC servo.


Comes Packaged with:


3450Accessories
  • Two mounting clamps
  • Two mounting brackets
  • Two rod end options: a clevis end and a threaded end with nut


  • Controllers:

    This Servo can be used with the following Phidget motor controllers:

  • 1066 - PhidgetAdvancedServo 1-Motor
  • 1061 - PhidgetAdvancedServo 8-Motor


  • Motor Properties

    Motor Type RC Linear Actuator (Servo)
    Stroke Length 100 mm
    Maximum Speed 12 mm/s
    Peak Power Point (@ 6 mm/s) 23 N
    Peak Efficiency Point (@ 8 mm/s) 12 N
    Gear Ratio 100:1
    Positional Error Max 300 £gm


    Physical Properties

    Rated Voltage 6 V DC
    Rated Current (on 1061 controller) 50 mA
    Rated Current (on 1066 controller) 83 mA
    Stall Current (on 1061 controller) 450 mA
    Stall Current (on 1066 controller) 450 mA


    Electrical Properties

    Gear Train Material Metal
    Backdrive Force 80 N
    Side Force Max 15 N
    Weight 56 g
    Wire Length 330 mm
    Operating Temperature Min -10°C
    Operating Temperature Max 85°C




    This product was added to our catalog on Tuesday 07 October, 2014.
    Reviews