| Displaying 82 to 90 (of 187 new products) |
Result Pages: 10 |
US$4.43
Date Added: Thursday 09 October, 2014
Manufacturer:
These LEDs have a soft glow, making them great for indicators.
5mm Diffused Red (Bag of 30)
These LEDs have a soft glow, making them great for indicators.
Description
Specifications
Connection
The 3611 is a small LED that has a wide light
beam and a pleasant low intensity glow. It's the ideal LED to use
for indicators.
Related Products:
You can control up to 64 LEDs with:
1032 - PhidgetLED-64 Advanced
You can also connect your LEDs to any device with a Digital Output.
Comes Packaged with:
Comes in an Antistatic pouch containing 30 LEDs
...
|
|
|
Date Added: Thursday 09 October, 2014
Manufacturer:
US$4.43
These are extra bright for applications where light matters.
5mm Four Chip Super Flux Red (Bag of 5)
These are extra bright for applications where light matters.
Description
Specifications
Connection
The 3605 LED is a square of brightness with
four times the capacity of a regular LED and has a very wide light
beam of 90°. Because of its brightness it is not recommended as
an indicator light.
Related Products:
You can control up to 64 LEDs with:
1032 - PhidgetLED-64 Advanced
You can also connect your LEDs to any device with a Digital Output.
Comes Packaged with:
Comes in an Antistatic pouch containing 5 LEDs
...
|
|
|
US$4.43
Date Added: Thursday 09 October, 2014
Manufacturer:
10mm Red LED (Bag of 20)
10mm Red LED (Bag of 20)
10mm bright general purpose Red LED
Description
Specifications
Connection
The 3600 is a bright general purpose Red LED
with a narrow beam. Because of its brightness and narrow beam it is
not recommended as an indicator light.
Related Products:
You can control up to 64 LEDs with:
1032 - PhidgetLED-64 Advanced
You can also connect your LEDs to any device with a Digital Output.
Comes Packaged with:
Comes in an Antistatic pouch containing 20 LEDs
Light Properties
...
|
|
|
Date Added: Thursday 09 October, 2014
Manufacturer:
US$126.85
This Phidget uses PWM to control the brightness of up to 64 LEDs.
PhidgetLED-64 Advanced
This Phidget uses PWM to control the brightness of up to 64 LEDs.
Description
Specifications
Resources
Code Sample
The PhidgetLED 64 allows you to independently
control 64 Light Emitting Diodes. Each LED can have the current limit
set individually, and the brightness controlled from 0 to 100% within
that limit using pulse-width modulation. These LED outputs can also
be used to interface other devices that benefit from pulse width modulation
(such as buzzers, fans, and other small, simple electronics).
Most standard LEDs have forward voltages below 2.75 Volts, and can
be used with the PhidgetLED by simply soldering them to a conne...
|
|
|
US$17.70
Date Added: Thursday 09 October, 2014
Manufacturer:
Phidgets mostly run on 5V, but if you need ¡Ó12V to
power up your sensor you can use this adapter.
5V to ±12V Sensor Adapter
Phidgets mostly run on 5V, but if you need ±12V to
power up your sensor you can use this adapter.
Description
Specifications
Resources
Connection
The 5V to ±12V Sensor Adapter provides
an easy solution for using ±12V sensors with Phidgets. Simply
plug in the custom cable, attach the other end of the cable to your
sensor, and connect the 1145 to the analog input of any Phidget InterfaceKit.
The 1145 is powered by the attached interface kit, so you don't need
a separate power supply for the sensor.
Comes Packaged with:
3002 ¡V 60cm Sensor Cable
50cm XH Transducer Cable
...
|
|
|
Date Added: Thursday 09 October, 2014
Manufacturer:
US$17.70
Phidgets mostly run on 5V, but if you need 12V to power
up your sensor you can use this adapter.
12V Sensor Adapter
Phidgets mostly run on 5V, but if you need 12V to power
up your sensor you can use this adapter.
Description
Specifications
Resources
The 5V to 12V Sensor Adapter provides an easy
solution for using 12V sensors (such as these CE voltage and current
sensors) with Phidgets. Simply hook up the sensor to the terminal
blocks, and connect it to the analog input of any Phidget InterfaceKit.
The 1144 is powered by the attached interface kit, so you don't need
a separate power supply for the sensor.
Comes Packaged with:
3002 ¡V 60cm Sensor Cable
10kΩ resistor x2
Rela...
|
|
|
US$17.70
Date Added: Thursday 09 October, 2014
Manufacturer:
This adapter lets you interface with all sorts of non-Phidgets resistance sensors, just select the resistance you want and away you go.
Switchable Voltage Divider
This adapter lets you interface with all sorts
of non-Phidgets resistance sensors, just select the resistance you want and
away you go.
Description
Specifications
Resources
Code Sample
The 1134 - Switchable Voltage Divider is a voltage divider with switches.
The switches can be used to control which resistors are used in the
voltage divider. The resistance values (in Ohms) are 249, 820, 2.61K,
8.45K, 27.4K, 91K, 300K and 1M. It is possible to have multiple switches
flipped, putting the corresponding resistors in parallel.
The 1134 Provides an interface to non-Phidgets variable resistan...
|
|
|
Date Added: Thursday 09 October, 2014
Manufacturer:
US$35.40
A common output mode for industrial sensors is 4-20mA.
This adapter lets you use 4-20mA sensors with a Phidgets Analog Input.
4-20mA Adapter
A common output mode for industrial sensors is 4-20mA.
This adapter lets you use 4-20mA sensors with a Phidgets Analog Input.
Description
Specifications
Resources
Code Sample
The 4-20mASensors can be connected to and powered by the provided
terminals on the 4-20mA Adapter board. The 1132 will measure the current
passing through the attached sensor and convert it to a voltage, where
it can be displayed as a SensorValue by a Phidget Interface board.
The 4-20 mA Adapter board internally produces +15V from the Phidget
InterfaceKit¡¦s input analog voltages which is used to power the connected
...
|
|
|
US$19.18
Date Added: Wednesday 08 October, 2014
Manufacturer:
This adapter lets you interface with all sorts of non-Phidgets resistance sensors, just dial in the resistance you want and away you go.
Voltage Divider
This adapter lets you interface with all sorts of non-Phidgets resistance sensors, just dial in the resistance you want and away you go.
Description
Specifications
Resources
Code Sample
The 1121 provides an interface to non-Phidgets resistance sensors
such as: Force-Sensing Resistors (FSR), light sensors, thermistors
(heat sensors), and bend sensors.
The Voltage Divider eliminates the need to connect a resistor to an
analog input by putting a high precision potentiometer on the board
to allow the adjustment of the 'fixed' resistor.
The interface to the variable resistance s...
|
|
|
|
| Displaying 82 to 90 (of 187 new products) |
Result Pages: 10 |
|
