TchineseEnglish
Your cart contains 1 items
New Products
Displaying 19 to 27 (of 188 new products) Result Pages: [<< Prev]   1  2  3  4  5 ...  [Next >>] 
16x Isolated Solid State Relay Phidget
  US$51.63
Date Added: Wednesday 08 August, 2018
Manufacturer:


16x Isolated Solid State Relay Phidget 16x Isolated Solid State Relay Phidget Add 16 PWM-enabled solid state relay outputs to your hub with this module. This board is isolated to prevent ground loops. Description Specifications Resources Programming For applications that require a ton of outputs, this module is the one you're looking for. With sixteen PWM-enabled relay outputs, not only can it handle orindary logic-level devices at 3.3V or 5V, but it can also be used to control devices of up to 30V volts and 8 amps. LED strips, DC motors, power relays, fans and other small circuits are all common loads for this type of output. The REL1101 connects to a port on a VINT Hub. See the Comaptible Products tab for a list of hubs.    ...
4x Isolated Solid State Relay Phidget
Date Added: Wednesday 08 August, 2018
Manufacturer:
  US$25.61


4x Isolated Solid State Relay Phidget 4x Isolated Solid State Relay Phidget Add four PWM-enabled solid state relay outputs to your hub with this module. This board is isolated to prevent ground loops. Description Specifications Resources Programming When the 3.3V digital output mode of your VINT port is not enough, this output module adds four PWM-enabled solid state relay outputs to your system. Because it uses relay outputs, you can control more powerful devices that require up to 30V and 8A. LED strips, DC motors, power relays, fans and other small circuits are just a few examples of what can be controlled with this module. The REL1100 connects to a port on a VINT Hub. See the Comaptible Products tab for a list of hubs.    ...
DC Motor Phidget
  US$78.18
Date Added: Wednesday 08 August, 2018
Manufacturer:


DC Motor Phidget DC Motor Phidget Control one high-current brushed DC motor with this powerful Phidget. The encoder input and analog input can enable precise control motor velocity and position. Description Specifications Resources Programming This DC Motor Phidget attaches to your VINT hub and controls the direction and voltage of one DC motor using high frequency pulse-width modulation to achieve smooth operation. It also has current control, allowing you to set a current limit, which puts a maximum on the amount of torque exterted by the motor and allows you to use larger power supplies than what the motor is normally rated for.    ...
Brushless DC Motor Phidget
Date Added: Wednesday 08 August, 2018
Manufacturer:
  US$67.85


Brushless DC Motor Phidget Brushless DC Motor Phidget Control a brushless DC motor from your VINT Hub. The hall effect input enables easy position and velocity control. Description Specifications Resources Programming Brushless DC motors have several advantages over their brushed counterparts: They have longer lifespans, run quieter, and have built-in position control thanks to the hall-effect sensor that tells the controller which coil to activate. Based on this feedback, the controller selects which coil to activate, which causes the rotor to be pulled into place. The DCC1100 requires a 8-30V DC external power supply and can control a single brushless DC motor from a port on your VINT Hub (see the Connection and Co...
Isolated 12-bit Voltage Output Phidget
  US$32.45
Date Added: Wednesday 08 August, 2018
Manufacturer:


Isolated 12-bit Voltage Output Phidget Isolated 12-bit Voltage Output Phidget Produce a voltage from -10 to +10 volts with this isolated voltage output module. Description Specifications Resources Programming When you need to generate a voltage between -10 and +10 volts, this board will do the job. With a resolution of 4.9mV (12-bit) and current as high as 5mA, it is designed to interface with devices that are controlled by an analog voltage signal. To use it, simply plug it into a VINT port and control the voltage with your program (See the Comaptible Products tab for a list of VINT Hubs). It will also launch an event when the actual output voltage varies from the chosen voltage (for example, when the attached device is drawing too much current). This Phidget is factory calibrated to ensure output accuracy. ...
Mini-USB Cable 180cm 24AWG
Date Added: Wednesday 08 August, 2018
Manufacturer:
  US$4.43


Mini-USB Cable 180cm 24AWG Mini-USB Cable 180cm 24AWG Use this cable to connect Phidget devices to your computer. Description Specifications 180cm USB 2.0 Cable. The cable includes a common mode choke/filter for noise reduction. The USB Mini-B connector plugs into the device. The USB type A connector goes into the computer. 1018_2B - PhidgetInterfaceKit 8/8/8 1046_0B - PhidgetBridge 4-Input 1014_2B - PhidgetInterfaceKit 0/0/4 1048_0B - PhidgetTemperatureSensor 4-Input And More... Physical Properties ...
Barometer Phidget
  US$16.23
Date Added: Tuesday 07 August, 2018
Manufacturer:


Barometer Phidget Barometer Phidget Precisely measure the absolute air pressures between 50 and 110 kPa with this barometer that connects to any VINT port. Description Specifications Resources Programming If you're looking for an air pressure sensor that's accurate and affordable, the Barometer Phidget has you covered. It connects to a VINT port and measures absolute pressures within the range of 50kPa and 110kPa, making it great for barometer applications (See the Comaptible Products tab for a list of VINT Hubs). If you happen to read a pressure outside of this range, an error will be thrown telling you that the measurement has saturated.        ...
Quadrature Encoder Phidget
Date Added: Tuesday 07 August, 2018
Manufacturer:
  US$16.23


Quadrature Encoder Phidget Quadrature Encoder Phidget Interface a quadrature encoder at speeds of up to 100,000 quadrature cycles per second to a port on your VINT Hub. Description Specifications Resources Programming A quadrature encoder is the most commonly used feedback device for a DC or stepper motor. With an encoder, you can keep track of how far your motor has turned, which then allows you to control the position and velocity in your code. Whether you want to build a robot whose wheels can respond to uneven terrain or measure the speed of a bicycle, you'll need an encoder and this adapter. The ENC1000 connects to a port on a VINT Hub. See the Comaptible Products tab for a list of hubs.        ...
40 CPR Quadrature Encoder
  US$16.23
Date Added: Tuesday 07 August, 2018
Manufacturer:


40 CPR Quadrature Encoder 40 CPR Quadrature Encoder This simple and affordable quadrature-output encoder fits onto the rear shaft of a motor so its position and velocity can be monitored. Description Specifications Resources There are so many projects that require motor position control that Phidgets decided to make an inexpensive, reliable option. The ENC4109 is exactly that: an affordable optical quadrature encoder that is compatible with the mounting pattern of the majority of the DC and stepper motors sold here (the same mounting pattern as the higher precision 3531_0 Optical Rotary Encoder HKT22). See the Connection & Compatibility tab for a complete list of motors to choose from.    ...
Displaying 19 to 27 (of 188 new products) Result Pages: [<< Prev]   1  2  3  4  5 ...  [Next >>]