This sensor connects to any device with a Digital
Input.Connect the +12 wire from the Power Supply (that's the one with
the white line) to the 3528 Brown wire.
Connect the 3528 Black wire to a Digital Input on the 1018.
Connect the Power supply Ground Wire and the 3528 Blue wire to
the Digital Input Ground connector on the 1018.
This is how you connect the 3528 to a Phidget board that does not
have 12V power such as the 1018, 1012 and 1203 using our 12VDC Power
Note: When the 3528 is connected
to a 1012, it will behave as a Normally Close (NC) sensor instead
of Normally Open (NO).
The 3528 can also be used with the 1144 - 12V Sensor Adapter if you
want to connect to a device with an analog input without worrying
about providing a 12V power supply.
For boards that have power input, if the supplied power is within
12-24VDC, the +V line can be connected to the terminal block, powering
the sensor from the Phidget. The 1019,
1073, and 1063
all accept external power.