TchineseEnglish
Your cart contains 1 items
Top » Catalog » Controllers » Motors » Stepper Controllers » 1062_1 » PhidgetStepper Unipolar 4-Motor [1062_1]
US$76.70

Accurately control up to 4 unipolar stepper motors with this controller. Connects to a USB port.

PhidgetStepper Unipolar 4-Motor






Accurately control up to 4 unipolar stepper motors with this controller. Connects to a USB port.






The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors. The 1062 can be used in applications that require precise positioning and continuous rotation, at low cost.

Note: Because most unipolar motors are resistive limitied, the 1062 does not support current control. If your motor requires current control, have a look at the 1063 - PhidgetStepper Bipolar 1-Motor or the 1067 - PhidgetStepper Bipolar HC.

Related Products:

If you need motors, we carry the following Unipolar Stepper Motors:

  • PM42L-048-17 950g-cm Unipolar Stepper
  • PM25S-048-15 140g-cm Unipolar Stepper
  • PM20L-20-14 50g-cm Unipolar Stepper


  • If you want to control larger industrial stepper motors, or if you need very precise positioning or a lot of torque, have a look at the1067 - PhidgetStepper Bipolar HC.



    Comes Packaged with:

  • A 3018 - Mini-USB Cable 180cm

  • A Hardware mounting kit (4 nuts and bolts (M3), 4 plastic spacers)

    Recommended Power Supplies:
    3024 ¡V Power Supply 12VDC 2.0A (North American style plug)



  • Controller Properties

    API Object Name Stepper
    Motor Type Unipolar Stepper
    Number of Motor Ports 4
    Motor Position Resolution 1/2 Step (40-Bit Signed)
    Position Max ± 5.49756E+11 1/2 steps
    Stepper Velocity Resolution 0.75 1/2 steps/sec
    Stepper Velocity Max 383.3 1/2 steps/sec
    Stepper Acceleration Resolution 140.6 1/2 steps/sec2
    Stepper Acceleration Min 140.6 1/2 steps/sec2
    Stepper Acceleration Max 140.6 1/2 steps/sec2


    Electrical Properties

    Available Current per Coil Max 1 A
    Supply Voltage Min 5 V DC
    Supply Voltage Max 12 V DC
    Current Consumption Min 23 mA
    Current Consumption Max 100 mA
    USB Speed Full Speed


    Physical Properties

    Power Jack Hole Diameter 5.5 mm
    Power Jack Pin Diameter 2.1 mm
    Power Jack Polarity Center Positive
    Recommended Wire Size (Motor Terminal) 16 - 26 AWG
    Recommended Wire Size (Power Terminal) 12 - 24 AWG
    Operating Temperature Min 0 °C
    Operating Temperature Max 70 °C


  • User Guide

  • Stepper Motor and Controller Primer

  • Motor Selection Guide

  • Mechanical Drawings

  • Download 3D Step File

  • Programming Resources


  • Enclosure

    We do not carry enclosures for the 1062_1, because motor controllers are prone to overheating when kept in enclosed spaces for extended periods of time with no airflow.


    Warning

    warning Make sure the power supply is unplugged before attaching or removing wires from the terminal blocks. Failure to do so could cause permanent damage to the PhidgetStepper board.




    This product was added to our catalog on Wednesday 08 October, 2014.
    Reviews